Friday, September 5, 2008

Slowly Plugging Away on the Back Hall

I was able to get the bead board and trim stained this past weekend using the new technique of the alcohol dye. I'm pretty happy with the results the color isn't as vibrant as the dyed shellac but the tone is much more even and it's far easier to work with.

Before we removed the Vinyl flooring from the back hall my plan was to just paint the back steps I figured they would be in horrible condition and it wouldn't be worth the time to ready them for a clear finish. Then I would have added some sand to the tread to keep people slipping with wet feet.

Turns out the stairs other than some damage from the metal tips the stairs were in rather good condition. So I decided to stain and clear coat them however I was still concerned about them being slick so I did a little online research and found out that you could at a clear sand like material to the clear coat to give the stairs some grip I called around and found this http://www.hcconcrete.com/products/solid-color-stains/Shark_Grip_Slip_Resistant_Additive/index.jsp at Sherwin Williams I mixed it in with Waterlox and rolled it onto the stair treads. It's barley noticeable when looking straight on which is really nice. But still gives you that grit that keeps you from riding down the stairs on your keester.

Here is one of the treads with the Clear Coat and SharkGrip

Tonight I'm going to apply another coat then one or two on Saturday and it should be it for the stairs then it's time for paint!

No comments: