Back into the game

It's been awhile but we are back to working on the house. We did do a few random projects over the winter. Chris worked on getting his workshop set up and I finished up the door for the bathroom which was one of the hold overs from the kitchen project. I'll have to post about that one later as it was necessary to do some minor repairs to get the bathroom door in order.

This most recent burst of home improvement mojo is due to refinancing, a 2% drop in interest rate was just way to good to pass up. Especially when the mortgage lady thinks the kitchen remodel may jump up the home's value by 10,000. We shall see, but at any rate I want the stairs to be nice and complete because every little bit helps.

Anyways on to the pictures.

Here is what the stairs looked like in March of 2007, it's frightening but this project has been going on for 2 years. Yikes! I guess we let this one spiral a bit out of control.

And here is what they looked like after the removal of the paneling and carpet. Not bad but the tack strip removal and years of carpet encapsulation definitely was a bit rough on them. On a side note look at those awful kitchen walls. It's true what they say it definitely gets worse before it gets better.

After stripping, cleaning, sanding, and 3 coats of Waterlox over the past 3 days they look like this. I'm pretty excited that whatever the next project it won't involve hanging out on the stairs.
Paint will go on over the course of this next week. I'm looking forward to it. It's going to be nice to finally have this wrapped up.

Slowly Plugging Away on the Back Hall

I was able to get the bead board and trim stained this past weekend using the new technique of the alcohol dye. I'm pretty happy with the results the color isn't as vibrant as the dyed shellac but the tone is much more even and it's far easier to work with.

Before we removed the Vinyl flooring from the back hall my plan was to just paint the back steps I figured they would be in horrible condition and it wouldn't be worth the time to ready them for a clear finish. Then I would have added some sand to the tread to keep people slipping with wet feet.

Turns out the stairs other than some damage from the metal tips the stairs were in rather good condition. So I decided to stain and clear coat them however I was still concerned about them being slick so I did a little online research and found out that you could at a clear sand like material to the clear coat to give the stairs some grip I called around and found this http://www.hcconcrete.com/products/solid-color-stains/Shark_Grip_Slip_Resistant_Additive/index.jsp at Sherwin Williams I mixed it in with Waterlox and rolled it onto the stair treads. It's barley noticeable when looking straight on which is really nice. But still gives you that grit that keeps you from riding down the stairs on your keester.

Here is one of the treads with the Clear Coat and SharkGrip

Tonight I'm going to apply another coat then one or two on Saturday and it should be it for the stairs then it's time for paint!

Floor is finished

After 3 days of crawling around on the floor and the fumes oh my the fumes. Here it is all finished. This is 3 coats of Waterlox, which I think came out very well. It was pretty easy to work with albeit on a bit on the expensive side, nearly twice the price of poly . I think If we use it again the low VOC version might be worth the additional 30 bucks. All things considered I would use it again.

I am very happy with the finished product. It's rustic but I think it works for a kitchen.

Progress Report

Lots of progress to report. Chris's parents came up last weekend and did helped us with some gardening, no pictures yet. I'm trying to get Chris to post about the gardening since I hid inside sanding the floor while everyone else worked on the garden. I decided not to rent a sander so I've been doing the whole thing with a random orbital sander. I was concerned that if we rented a sander we would take off too much of the wood and that it would end up just a bit too perfect. In this whole project one of my overall goals has been to make the kitchen look like it belongs to the house.

With this goal in mind I've been going back and forth about floor finishes for quite some time. Most of our rooms still have the original shellacked floors with their nice orangey color. I toyed with the idea of doing the same in the kitchen but decided against it because of durability concerns, a kitchen is going to see a lot of water and it is very possible that alcohol may be spilled which could put the finish at risk. So then I was leaning towards doing an alcohol based stain to get a similar shade and then finishing with a water based poly I had a lot of concerns about that as well we have a lot of different boards pieced in to the floor that are a lot of different ages and I just didn't know how the different woods were going to take the stain and at this point I just don't have the heart to strip it down again and re-sand. So in the end I decided on Waterlox I think it's going to give me some of the color that I desire and it should be easily reparable but still have the durability that the poly would have given me.

I did some test areas with it this afternoon and I think it's going to work out wonderfully. Here is the sample from the stove area. The stove area is probably one of the areas in the kitchen with the most cobbled together flooring I figure if it can look good there it should look good anywhere.

Waterlox has a 12-24 hour cure time and unfortunately for us the kitchen serves not only as a kitchen but also as hallway so the plan is that I will begin starting tomorrow night at 6:00 and then do one coat each night until I'm finished. Fortunately we still have the stairs on the back of our house that used to lead up to the upstairs apartment so we should be able to avoid the room in the evenings while the finish is curing. I hope to finish up by Wednesday so the floor will have a day and a half to cure before the plumber comes Friday.