Slowly Plugging Away on the Back Hall

I was able to get the bead board and trim stained this past weekend using the new technique of the alcohol dye. I'm pretty happy with the results the color isn't as vibrant as the dyed shellac but the tone is much more even and it's far easier to work with.

Before we removed the Vinyl flooring from the back hall my plan was to just paint the back steps I figured they would be in horrible condition and it wouldn't be worth the time to ready them for a clear finish. Then I would have added some sand to the tread to keep people slipping with wet feet.

Turns out the stairs other than some damage from the metal tips the stairs were in rather good condition. So I decided to stain and clear coat them however I was still concerned about them being slick so I did a little online research and found out that you could at a clear sand like material to the clear coat to give the stairs some grip I called around and found this http://www.hcconcrete.com/products/solid-color-stains/Shark_Grip_Slip_Resistant_Additive/index.jsp at Sherwin Williams I mixed it in with Waterlox and rolled it onto the stair treads. It's barley noticeable when looking straight on which is really nice. But still gives you that grit that keeps you from riding down the stairs on your keester.

Here is one of the treads with the Clear Coat and SharkGrip

Tonight I'm going to apply another coat then one or two on Saturday and it should be it for the stairs then it's time for paint!

We have a trim color

My Brown Mahogany TransTint Dye came on Thursday afternoon and Saturday afternoon I got a chance to try it out.

First I had to calculate the proper proportions of dye to shellac the bottle says 1 oz of dye to 1 quart of shellac. I scaled the recipe back to 1.56CCs of dye to 50CCs of shellac. For this step I used one of my measuring cups from Rockler and a syringe I bought from the farm section of my local Fleet Farm. I ordered some syringes and assorted measuring vessles from American Science and Surplus on Friday but alas they did not arrive on time.



Next I measured out the dye and shellac, I had to dump the dye out on a little plastic saucer in order to suck it up with the syringe the neck of the dye bottle was just a bit too small


After measuring out the proper proportions I mixed the dye into the shellac and then applied to my sample piece using a piece of an old t-shirt
I was so pleased with the way it came out I stripped my original test piece and refinished it with the shellac.

New (Here I'm comparing it with the trim that is yet to be stripped, I may darken this piece up a bit with another coat):

Old:By my calculations I should need two bottles of dye to slightly less than one gallon of shellac. I'm still thinking I should be able to do all the kitchen trim and doors with one gallon of shellac. Once I get the final mixed up I should be able to finish the door that has been sitting in my shop since January. Whoo hoo, Progress!